View FSHDMI08_9011638.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

to learn more about on semiconductor, please visit our website at www.onsemi.com please note: as part of the fairchild semiconductor integration, some of the fairchild orderable part numbers will need to change in order to meet on semiconductors system requirements. since the on semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the fairchild part numbers will be changed to a dash (-). this document may contain device numbers with an underscore (_). please check the on semiconductor website to verify the updated device numbers. the most current and up-to-date ordering information can be found at www.onsemi.com . please email any questions regarding the system integration to fairchild_questions@onsemi.com . is now part of on semiconductor and the on semiconductor logo are trademarks of semico nductor components industries, llc dba on semiconductor or its subsid iaries in the united states and/or other countries. on semiconductor ow ns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellec tual property. a listing of on semiconductor?s product/patent cover age may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf . on semiconductor reserves the right to make changes without further notice to any products herein. on semicon ductor makes no warranty, representation or guarantee regarding the s uitability of its products for any particular purpose, nor does on semico nductor assume any liability arising out of the application or use of any product or circuit, and speci?ca lly disclaims any and all liability, including without limitation spe cial, consequential or incidental damages. buyer is responsible for i ts products and applications using on semiconductor products, including compliance with all laws, regul ations and safety requirements or standards, regardless of any suppor t or applications information provided by on semiconductor. ?typica l? parameters which may be provided in on semiconductor data sheets and/or speci?cations can and do vary in diffe rent applications and actual performance may vary over time. all operat ing parameters, including ?typicals? must be validated for each custo mer application by customer?s technical experts. on semiconductor does not convey any license und er its patent rights nor the rights of others. on semiconductor products a re not designed, intended, or authorized for use as a critical compone nt in life support systems or any fda class 3 medical devices or medical devices with a same or similar classi?ca tion in a foreign jurisdiction or any devices intended for implantation i n the human body. should buyer purchase or use on semiconductor products fo r any such unintended or unauthorized application, buyer shall indemnify and hold on semico nductor and its of?cers, employees, subsidiaries, af?liates, and di stributors harmless against all claims, costs, damages, and expense s, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associa ted with such unintended or unauthorized use, even if such claim alleges th at on semiconductor was negligent regarding the design or manufacture o f the part. on semiconductor is an equal opportunity/af?rmative action employer. this literatu re is subject to all applicable copyright laws and is not for resale in any manne r.
august 2009 ? 2006 fairchild semiconductor corporation www.fairchildsemi.com FSHDMI08 rev. 1.0.4 fshmdi08 low-voltage, wide -bandwidth, hdmi switch wit h ddc and cec multiplexer click here for this datasheet translated into chinese! FSHDMI08 low-voltage, wide-bandwidth, hdmi switch with ddc and cec multiplexer features ? -25db non-adjacent channel crosstalk at 1.65gbps ? low signal loss: -1.5dbg attenuation at 1.65gbps ? isolation ground between channels ? fast turn-on/off time (< 6ns) ? 1.65gbps throughput ? 8kv esd protection ? low skew: intra-pair <90ps, inter-pair < 150ps ? low power consumption: 1a maximum applications ? xga and 720p dvi and hdmi video source selection description the FSHDMI08 is a wide-bandwidth switch designed for routing hdmi link data, clock, and the relevant ddc and cec control signals that support the data rate up to 1.65gbps per channel for uxga resolution. applications include lcd tvs, dvd, set-top boxes, and notebook designs with multiple digital video interfaces. this switch allows the passage of hdmi link signals with ultra-low non-adjacent channel crosstalk and ultra- low off isolation. this is critical to minimize ghost images between active video sources in video applications. the wide bandwidth of this switch allows the high-speed differential signal to pass through with minimal additive skew and phase jitter. the pinout supports an hdmi standard-a connector pcb layout. important note: for additional information, please contact analogswitch@fairchildsemi.com . ordering information order number eco status package description packing method FSHDMI08mtdx rohs 56-lead, thin shrink small outline package (tssop), jedec mo-153, 6.1mm wide tape and reel for fairchilds definition of eco status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html . FSHDMI08 hdmi receiver graphics processor primary hdmi source secondary hdmi source primary source ddc & cec secondary source ddc & cec tmds channels control channels FSHDMI08 hdmi receiver hdmi receiver graphics processor graphics processor primary hdmi source secondary hdmi source primary source ddc & cec secondary source ddc & cec tmds channels control channels figure 1. single-link hdmi application
? 2006 fairchild semiconductor corporation www.fairchildsemi.com FSHDMI08 rev. 1.0.4 2 fshmdi08 low-volta ge, wide-bandwidth, hdmi switch with ddc and cec multiplexer functional diagram control gnd s tmds 1d2+ 1d2- 1d0+ 1d0- 1d1+ 1d1- d2+ d0+ d0- d2-d1- d1+ 1clk+ 1clk- clk- clk+ 2d2+ 2d1+ 2d0+ 2d0- 2d2- 2d1- 2clk+ 2clk- scl sda cec hpd scl1 sda1 cec1 hpd1 scl2 sda2 cec2 hpd2 v cc3 v ddc dgnd /oe tmds /oe ddc s ddc figure 2. functional diagram pin descriptions pin name description 1-4,6,7,11-14,16,17, 47,48,50,51,53,54 1dn+, 1dn-, 2dn+, 2dn-, dn+, dn- tmds data channels 8,9,18,19,44,45 1clk+, 1clk-, 2clk+, 2c lk-, clk+, clk- tmds clock channels 24,28,33 hpd1, hpd2, hpd hot plug detects 22,26,35 scl1, scl2, scl serial clock (ddc) 23,27,34 sda1, sda2, sda serial data (ddc) 21,25,36 cec1, cec2, cec consumer electronics control (cec) 29 v ddc ddc power 20,39,40,55,56 v cc3 tmds power 30 dgnd ddc/cec gnd 5,10,15,38,43,46,49,52 gnd gnd 32,42 s tmds , s ddc select pins (tmds, ddc) 31,41 /oe tmds , /oe ddc output enable (tmds, ddc)
? 2006 fairchild semiconductor corporation www.fairchildsemi.com FSHDMI08 rev. 1.0.4 3 fshmdi08 low-volta ge, wide-bandwidth, hdmi switch with ddc and cec multiplexer pin assignments v cc3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 1d2+ 1d0+ 1d2- cec1 sda1 hpd1 scl1 1d1+ 1d1- 1d0- 1clk+ 1clk- gnd gnd 2d2+ 2d0+ 2d2- cec2 sda2 hpd2 scl2 2d1+ 2d1- 2d0- 2clk+ 2clk- gnd cec sda hpd scl gnd d2+d2- gnd d1+d1- d0+ d0- gnd clk+ clk- v cc3 v cc3 gnd /oe tmds s tmds dgnd v ddc gnd v cc3 v cc3 /oe ddc s ddc dgnd figure 3. pin assignments truth table s tmds, s ddc /oe tmds, /oe ddc function dont care logic level high all ports disconnected (hi-z) logic level low logic level low 1dn+/1dn-=dn+/dn-; 1clk+/ 1clk-=clk+/clk-; hpd1=hpd; scl1=scl; sda1=sda; cec1=cec logic level high logic level low 2dn+/2dn-=dn+/dn-; 2clk+/ 2clk-=clk+/clk-; hpd2=hpd; scl2=scl; sda2=sda; cec2=cec
? 2006 fairchild semiconductor corporation www.fairchildsemi.com FSHDMI08 rev. 1.0.4 4 fshmdi08 low-volta ge, wide-bandwidth, hdmi switch with ddc and cec multiplexer absolute maximum ratings stresses exceeding the absolute maximum ratings may dam age the device. the device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. in addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. the absolute maximum ratings are stress ratings only. symbol parameter min. max. unit v cc3 supply voltage C tmds channels -0.5 4.6 v v ddc supply voltage C 5v ddc -0.5 6.0 v v swtmds (1) switch i/o voltage 1dn+, 1dn-, 2dn+, 2dn-, dn+, dn-, 1clk+, 1clk-, 2clk+, 2clk-, clk+, clk- -0.5 v cc3 + 0.3 v v swddc (1) switch i/o voltage hpd1, hpd2, hpd, scl1, scl2, scl, sda1, sda2, sda, cec1, cec2, cec -0.5 v ddc + 0.3 v v cntrlt (1) control input voltage s tmds , /oe tmds -0.5 4.6 v v cntrld (1) control input voltage s ddc , /oe ddc -0.5 6.0 v i ik input clamp diode current -50 ma i sw switch i/o current (continuous) 128 ma t stg storage temperature range -65 +150 c t j maximum junction temperature +150 c t l lead temperature (soldering, 10 seconds) +260 c i/o to gnd 8.0 human body model (jedec: jesd22-a114) all other pins 2.5 esd charged device model (jedec: jesd22-c101) 2.0 kv note: 1. the input and output negative ratings may be exceeded if the input and output diode current ratings are observed. recommended operating conditions the recommended operating conditions table defines the conditions for actual device operation. recommended operating conditions are specified to ens ure optimal performance to the datasheet specifications. fairchild does not recommend exceeding them or designing to absolute maximum ratings. symbol parameter min. max. unit v cc3 tmds supply voltage C 3v 3.0 4.3 v v ddc ddc supply voltage 3.0 5.5 v v cntrlt control input voltage C s tmds , /oe tmds 0 v cc3 v v cntrld control input voltage C s ddc , /oe ddc 0 v ddc v v swtmds switch i/o voltage for hdmi path v cc3 C 0.6 v cc3 v v swddc switch i/o voltage for ddc path 0 v ddc v t a operating temperature -40 +85 oc ja thermal resistance (free air) +80 oc/w
? 2006 fairchild semiconductor corporation www.fairchildsemi.com FSHDMI08 rev. 1.0.4 5 fshmdi08 low-volta ge, wide-bandwidth, hdmi switch with ddc and cec multiplexer dc electrical characteristics all typical values are for v cc3 =3.3v and v ddc =5.0v at 25c unless otherwise specified. t a =- 40c to +85c symbol parameter v cc3 / v ddc (v) conditions min. typ. max. unit v ik clamp diode voltage v cc3 =3.0 v ddc =5.0 i in =-18ma -1.2 v v ih control input voltage high v cc3 =3.0 to 3.6 v ddc =3.0 to 5.5 2 v v il control input voltage low v cc3 =3.0 to 3.6 v ddc =3.0 to 5.5 0.8 v i oztmds off state leakage tmds channels v cc3 =3.6 v ddc =5.5 0 v swtmds v cc3 figure 5 -1 1 a i ozddc off state leakage ddc/cec channels v cc3 =3.6 v ddc =5.5 0 v swddc v ddc figure 5 -5 5 a i intmds control input leakage (s tmds , /oe tmds ) v cc3 =3.6 v ddc =5.5 v swddc =0 to v cc3 -1 1 a i inddc control input leakage (s ddc , /oe ddc ) v cc3 =3.6 v ddc =5.5 v swddc =0 to v ddc -1 1 a i cc3 quiescent supply current -tmds v cc3 =3.6 v ddc =5.5 v swtmds =v cc3 C 0.6 or v cc3 , i out =0 2 a i ddc quiescent supply current -ddc v cc3 =3.6 v ddc =5.5 v swddc =0 or v ddc , i out =0 2 a ? i cct3 increase in i cc3 v cc3 =3.6 v cc5 =5.5 one input at 3.0v; other inputs at v cc3 - 0.6 or v cc3 100 a ? i cctd increase in i ddc v cc3 =3.6 v cc5 =5.5 one input at 3.0v; other inputs at v ddc 15 a
? 2006 fairchild semiconductor corporation www.fairchildsemi.com FSHDMI08 rev. 1.0.4 6 fshmdi08 low-volta ge, wide-bandwidth, hdmi switch with ddc and cec multiplexer ac electrical characteristics all typical values are for v cc3 =3.3v and v ddc =5.0v at 25c unless otherwise specified. t a =- 40oc to +85oc symbol parameter v cc3 / v ddc (v) conditions min. typ. max. unit tmds channels t ontmds turn-on time s, /oe to output v cc3 =3.0 to 3.6 v ddc =5.0 v swtmds =v cc3 -0.5, r pu =50 ? , c l =5pf figure 6, figure 7 4 6 t offtmds turn-off time s to output v cc3 =3.0 to 3.6 v ddc =5.0 v swtmds =v cc3 -0.5, r pu =50 ? , c l =5pf figure 6, figure 7 2 4 ns t bbm-tmds break-before-make time (2) v cc3 =3.0 to 3.6 v ddc =5.0 v swtmds =v cc3 -0.5, r pu =50 ? , c l =5pf figure 15 1 ns t pd (t plh, t phl ) switch propagation delay (2) v cc3 =3.0 to 3.6 v ddc =5.0 r pu =50 ? , c l =5pf figure 14 400 ps t jitter total jitter (dj+rj) v cc3 =3.0 to 3.6 v ddc =5.0 f=165mhz clock with 50% duty cycle, r pu =50 ? , c l =5pf figure 14 90 ps t ratio duty cycle ratio v cc3 =3.0 to 3.6 v ddc =5.0 f=165mhz clock with 50% duty cycle, r pu =50 ? , c l =5pf figure 14 40 50 60 % t sk1 intra-pair skew (tmds cn+ to cn-) v cc3 =3.0 to 3.6 v ddc =5.0 f=1.65gbps, 2 23 -1 prbs, r pu =50 ? , c l =5pf figure 14 55 100 ps t sk2 inter-pair skew (between any two tmds switch pair paths) v cc3 =3.0 to 3.6 v ddc =5.0 f=1.65gbps, 2 23 -1 prbs, r pu =50 ? , c l =5pf figure 14 90 160 ps v cc3 =3.0 to 3.6 v ddc =5.0 r t =50 ? , f=370mhz figure 10 -30 oirr tmds off-isolation (tmds channels) v cc3 =3.0 to 3.6 v ddc =5.0 r t =50 ? , f=825mhz figure 10 -25 db v cc3 =3.0 to 3.6 v ddc =5.0 r t =50 ? , f=370mhz figure 11 -25 xtalk tmds non-adjacent channel crosstalk (tmds channels) v cc3 =3.0 to 3.6 v ddc =5.0 r t =50 ? , f=825mhz figure 11 -20 db f max maximum throughput (2) v cc3 =3.3 v ddc =5.0 1.65 gbps control channels C ddc / cec t onddc turn-on time; s ddc , /oe ddc to output v cc3 =3.3 v ddc =3.0 to 5.5 v swddc =2v, r ddc =1k ? , c l =5pf 28 ns t offddc turn-off time; s ddc , /oe ddc to output v cc3 =3.3 v ddc =3.0 to 5.5 v swddc =2v, r l =1k ? , c l =5pf 24 ns note: 2. guaranteed by characterization, not production tested.
? 2006 fairchild semiconductor corporation www.fairchildsemi.com FSHDMI08 rev. 1.0.4 7 fshmdi08 low-volta ge, wide-bandwidth, hdmi switch with ddc and cec multiplexer test diagrams nd m ,nclk m , cecn,hpdn scln, sdan select v cntrlt =0orvcc3 v cntrld =0orv ddc i on v on r on = v on /i on gnd v sw gnd d m ,clk m , cec,hpd, scl,sda , each switch port is tested separately. select nc a i oz v sw gnd d m ,clk m , cec,hpd, scl, sda v cntrlt = 0 or vcc3 v cntrld =0orv ddc gnd figure 4. on resistance figure 5. off leakage r pu and c l are functions of the application environment (see ac/dc tables for values of c l and r pu ). c l includes test fixture and stray capacitance. r pu c l gnd gnd v cntrlt v swtmds v out generator 10ma v cc3 figure 6. tmds test circuit load r pu and c l are functions of the application environment (see ac/dc tables for values of c l and r ddc ). c l includes test fixture and stray capacitance. r ddc c l gnd gnd v cntrld v swddc v out v ddc nd m ,nclk m , cecn,hpdn, scln,sdan figure 7. ddc test circuit load
? 2006 fairchild semiconductor corporation www.fairchildsemi.com FSHDMI08 rev. 1.0.4 8 fshmdi08 low-volta ge, wide-bandwidth, hdmi switch with ddc and cec multiplexer test diagrams t rise =2.5ns gnd v cc3 90% 90% 10% 10% t fall = 2.5ns v cc3 /2 v cc3 /2 input - v cntrlt output- v out 10% v cc3 v cc3 C0.5 t on t off 10% t rise =2.5ns gnd v ddc 90% 90% 10% 10% t fall =2.5ns v/2 output - v out v ol +0.3 v oh v ol t on t off v/2 v ddc /2 input - v cntrld 10% 10% v ddc /2 v ddc /2 figure 8. turn-on / turn-off waveforms fi gure 9. ddc turn-on / turn-off waveforms v gnd gnd r gnd gnd v s r s network analyzer r gnd v cntrlt gnd off isolation = 20 log (v out /v in ) v in v out t r t figure 10. channel off isolation v out gnd gnd r gnd gnd v s r s r gnd r s and r t are functions of the application environment (see ac/dc tables for values). v cntrlt gnd nc crosstalk = 20 log (v out /v in ) v in r t network analyzer t figure 11. non-adjacent channel-to-channel crosstalk
? 2006 fairchild semiconductor corporation www.fairchildsemi.com FSHDMI08 rev. 1.0.4 9 fshmdi08 low-volta ge, wide-bandwidth, hdmi switch with ddc and cec multiplexer test diagrams capacitance meter v sw f=1mhz v cntrlt =0orv cc3 v cntrld =0orv ddc = v sw capacitance meter v sw f=1mhz v cntrlt =0orv cc3 v cntrld =0orv ddc figure 12. channel off capacitance figure 13. channel on capacitance t rise =240ps -500mv +500mv 80% 80% 20% 20% t fall = 240ps 0v 0v input - v swtmds output- v out +500mv C500mv t plh t phl 0v 0v input differential pair 1dn+, 1dn-, 2dn+, 2dn-, 1clk+, 1clk-, 2clk+, 2clk-, output differential pair dn+, dn-, clk+, clk-, t=|t -t| t=| t plh/hl max. - t plh/hl min. | 0v sk1 plh - phl sk2 figure 14. intra- and inter-pair skew t pd t rise =2.5ns gnd v cc3 90% 10% v cc3 /2 output - v out v cc3 v ol t bbm 10% r pu and c l are functions of the application environment (see ac/dc tables for values). c l includes test fixture and stray capacitance. r pu c l gnd gnd v out v cc3 10ma 10ma generator v cntrlt input - v cntrlt v - figure 15. break before make
? 2006 fairchild semiconductor corporation www.fairchildsemi.com FSHDMI08 rev. 1.0.4 10 fshmdi08 low-volta ge, wide-bandwidth, hdmi switch with ddc and cec multiplexer physical dimensions mtd56rev3 1 62 3 56 51 34 28 29 0.2 cba 0.10 ab c 0.1 c -c- 1.45 6.15 9.125 0.30 0.50 8.10 4.05 0.25 0.50 b a 7.6 figure 16. 56-pin thin-shrink small outline package (tssop) package drawings are provided as a service to customers considering fairchild components. drawings may change in any manner without notice. please note the revision and/or date on the drawing and contact a fairchild semiconductor representative to ver ify or obtain the most recent revision. package specifications do not expand t he terms of fairchilds worldwide terms and condition s, specifically the warranty therein, which covers fairchild products. always visit fairchild semiconductors online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ .
? 2006 fairchild semiconductor corporation www.fairchildsemi.com FSHDMI08 rev. 1.0.4 11 fshmdi08 low-volta ge, wide-bandwidth, hdmi switch with ddc and cec multiplexer
www. onsemi.com 1 on semiconductor and are trademarks of semiconductor components industries, llc dba on semiconductor or its subsidiaries i n the united states and/or other countries. on semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property . a listing of on semiconductors product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent ? marking.pdf . on semiconductor reserves the right to make changes without further notice to any products herein. on semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does on semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. buyer is responsible for its products and applications using on semiconductor products, including compliance with all laws, reg ulations and safety requirements or standards, regardless of any support or applications information provided by on semiconductor. typical parameters which may be provided in on semiconductor data sheets and/or specifications can and do vary in dif ferent applications and actual performance may vary over time. all operating parameters, including typic als must be validated for each customer application by customers technical experts. on semiconductor does not convey any license under its patent rights nor the right s of others. on semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any fda class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. should buyer purchase or use on semicondu ctor products for any such unintended or unauthorized application, buyer shall indemnify and hold on semiconductor and its officers, employees, subsidiaries, affiliates, and distrib utors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that on semiconductor was negligent regarding the design or manufacture of the part. on semiconductor is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5817 ? 1050 www.onsemi.com literature fulfillment : literature distribution center for on semiconductor 19521 e. 32nd pkwy, aurora, colorado 80011 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your localsales representative ? semiconductor components industries, llc

▲Up To Search▲

Price & Availability of FSHDMI08

	To Download FSHDMI08 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .